Wet Look Sealer for Concrete: A Guide


if you’re looking to seal a newly poured concrete space, whether a driveway, patio, or garage floor, you need to consider your sealer options. A quality concrete sealer will offer many benefits and will extend the life of your concrete far into the future. Not only will they keep mold from growing, they will increase the strength of your concrete and can even improve its color. In other words, there’s no reason not to seal your concrete after it’s been poured.

But what kind of sealer should you use? After all, there are a myriad of options available. Although each kind of sealer has its pros and cons, we believe that a wet look sealer for concrete can be a great option if you’re looking to both protect your concrete and enhance its overall look. So, here’s everything you need to know (in 500 words or less) about wet look sealer for concrete.

What is a Wet Look Sealer for Concrete?

Normally, wet look sealers are acrylic, solvent based sealers that create a protective layer on top of your concrete. They will leave your concrete with a glossy, dark finish that will make your concrete look as if a light mist has been sprayed over it. This can make a huge difference in the overall look of your concrete and can make it pop with added contrast.

What Should I Look for in a Wet Look Sealer for Concrete?

When looking for sealer, you’ll want to keep a couple of things in mind. First, you’ll want to remember that solvent based sealers tend to have higher VOC concentrations. As a result, your state or local government may have certain requirements about how these sealers can be used. Make sure to consider this as you’re making your decisions. Also, you should note that sealers with a high VOC concentration need to be handled more carefully and should only be applied where you have ample ventilation.

In addition to considering the sealer’s VOC concentration, you should also look for a sealer that offers breathability and is UV stable. And if your concrete is outdoors, make sure that the sealer will protect against the elements, including freezing water, sunshine, and salt.

Finally, if you can find a sealer that protects against scratches and scuffs, you’ll ensure that your concrete looks its best for as long as possible.

Applying Wet Look Sealer for Concrete Requires Care

Some people aren’t fans of using wet look sealer for plain, poured concrete. The reason for this is simple: if care isn’t taken during the application process, it can result in uneven, blotchy spots covering your slab.

So, when applying wet look sealer, try to find a sprayer that puts out an even coat. Start thin and add coats as necessary. And be careful about over-saturating your sealer. Although you can use a brush or roller to apply sealer, they make it more difficult to achieve a uniform coat. So, unless you have experience, you may want to stick with a sprayer. If you need to add more than one coat, let your first coat dry for 3 to 4 hours before adding a second.

When you’re finished applying your wet look sealer, let the space cure for one day before you allow foot traffic. And give it 2 to 3 days before you allow for heavy foot traffic. If you have coated a driveway or garage, you may want to wait up to a week or two before driving on it, depending on the sealer. You should be able to get a better idea of the length of time it takes to cure your particular sealer by checking out its label.

With a little care and elbow grease, you can have a concrete space that stays protected from the elements and remains beautiful for years to come.

Share the Post:

Related Posts

Join Our Newsletter