Types of Concrete Floor Coating


Concrete floors are great for durability, but they can be prone to staining and discoloration. Concrete floor coatings help prevent further damage to the concrete floor and also add a layer of protection to the floor.


Epoxy is a 2-component system, meaning it requires the use of two separate products—an epoxy resin and a hardener. Epoxy flooring is the most expensive type of coating because it’s very durable and can be used in high-traffic areas. Epoxy also requires more maintenance than other types of coating but provides a superior finish that makes people think you have an actual floor and not just concrete.

Epoxy does not require a primer before application, so if you are looking for an easy way to cover up your garage floor then this option may be right for you!


Cementitious urethanes

Cementitious urethanes are polymer-modified urethane. They are durable, flexible, and resistant to most chemicals including acids and alkalis. These coating types are easy to apply, maintain, and clean. Concrete floor coatings require no sanding or priming prior to application which makes them an ideal choice for DIYers.

In addition to being easy to apply, cementitious urethanes provide excellent physical properties such as abrasion resistance, impact resistance, chemical resistance, and thermal conductivity. The material also offers outstanding dimensional stability because it doesn’t shrink or swell with fluctuations in temperature like other products do (i.e., epoxy). Because of these attributes, it has been shown that they can last up 20 years or more under normal conditions!

Protective Wear Toppers

Protective wear toppers are a thin layer of material that can be applied to the floor. They are a good option for concrete floors that have been damaged by oil or chemicals and need protection. The protective wear topper will protect your floor from dirt and moisture, which means it’s an excellent choice if your garage has oil stains all over the place. You can also use this kind of coating in areas where there is a high amount of foot traffic like restaurants or gyms because it will extend the life span of your concrete by keeping it strong and free from damage so you don’t have to replace it very often!

Penetrating Sealers

Penetrating sealers are usually applied by hand, but can also be sprayed or injected into the concrete. They work by penetrating deeply into the pores of the concrete to form a water-resistant barrier that prevents moisture from getting through and causing staining. Penetrating seals are commonly used in kitchens and bathrooms to protect against stains caused by soaps, detergents, dishwashing liquids, and other chemicals that may be spilled on the floor. They can also be used on driveways and garage floors as well as outdoor areas such as pool decks and patios if they are exposed to vehicle traffic or area flooding is a concern.

Penetrating sealer should not be confused with topcoat floor coatings which will cover up existing finishes rather than penetrate them. While both types of products provide similar protection from stains caused by spills or damage due to wear over time (such as scratches), penetrating sealers do not have any color added so they cannot change the look of your flooring like some topcoats can when using different colors in addition.


Concrete Floors Coatings – Why You Need Them

Concrete Floors are a common feature in most houses, and they need to be protected. You can use different types of floor coating to add a layer of protection to your concrete floor. This will prevent further damage to the concrete and make it last longer.

Additionally, coating your concrete floor will make your house look better because it will cover up any cracks or stains that might be on the surface of the concrete. A good coat of coating can also make your home more attractive by adding color or texture variation in one room or throughout an entire home.

Concrete floor coatings help prevent further damage to the concrete floor and also add a layer of protection to the floor.

Concrete floor coatings help prevent further damage to the concrete floor and also add a layer of protection to the floor. In this case, they should be applied as soon as possible to protect your concrete floor from any further damage.

A good concrete floor coating will also serve as a protective barrier against stains and scuffs that are likely to occur in a public or commercial environment.



If you’re looking for a way to protect your concrete floor from wear and tear, there are many different types of concrete floor coatings to choose from. Each type has its own benefits and drawbacks, but the most important thing is that you choose one that fits your needs.

Make sure to consult with a professional before deciding which type will work best for your project! Visit The Paver Sealer Store!

Share the Post:

Related Posts

Join Our Newsletter