TPSS Concrete, Paver & Stone Solutions

UltraGloss SX – High Gloss Urethane Sealer

Price range: $61.50 through $261.38

Rust Erase Pro – Professional Grade Stain & Rust Remover

$69.95

Ultra Seal Ultimate Surface Prep

Price range: $69.95 through $223.84

Ultra Seal Penetrating Natural Stone Sealer

Price range: $109.95 through $351.84

Clear Pink Stuff

Price range: $35.00 through $85.00

Ultra Seal Eco Shield Dry Look Penetrating Concrete Sealer

Price range: $51.50 through $195.70

Ultra Seal Enhancing Impregnating Stone Sealer

Price range: $119.95 through $407.83

Water Based Epoxy Concrete floor and Concrete Block Wall Waterproofer

$109.87

Melt Away Paint Stripper – Fast, Effective Coating Remover

Price range: $77.00 through $246.40

ULTRA SEAL – Classic Gloss Wet Look Paver Sealer

Original price was: $357.00.Current price is: $321.00.

Semi Transparent Color Additives, Dyes, Stains and Tints

$38.95

Rust Erase Pro – Professional Grade Stain & Rust Remover

Professional product profile

Rust Erase Pro is a professional-grade rust and rust-stain remover for compatible concrete, brick, stucco, patios, sidewalks, fences, and other hardscape surfaces.

Rust stain remover applied to a concrete walkway

FinishClean substrate / stain removal

SystemRust-stain treatment

Best forCompatible concrete, brick, stucco, patios, sidewalks, and masonry

ApplicationSponge, brush, sprayer, or roller; spot-test first

Targeted rust treatment

Product performance overview

Rust removal is a targeted correction that works best when the stain source is identified first. Irrigation, fertilizer, metal contact, and runoff can create different patterns and can cause the stain to return if the source remains active.

Key advantages

What this product is designed to deliver

Designed for localized rust and rust-stain removal
Multiple application tools for small or larger areas
Useful before applying a new sealer
Helps restore the appearance of concrete, brick, patios, and masonry

Recommended uses

Where it performs best

Irrigation rust, orange surface staining, and localized rust marks on compatible hardscape.

Coverage planning

Measure before ordering

Coverage depends on stain size, severity, porosity, and application method.

Open the Coverage Calculator

Job planning

Build the application around product requirements

Identify and photograph the stain, correct the source when possible, protect surrounding materials, spot-test, follow the labeled dwell time, rinse completely, and inspect after the surface dries.

Four-stage process

Application overview

Protect adjacent materials, plants, metal, and painted surfaces.
Wear rubber gloves and the PPE required by the label and SDS.
Apply to a small test area first, then treat the stain using the recommended dwell time.
Rinse completely and confirm the stain is removed or reduced before repeating.

Technical noteSurface compatibility, weather, moisture, dilution, mixing, dwell time, and cure requirements vary by product. Read the current label and SDS, test a small area, and follow the product-specific technical directions before full application.

Product questions

Frequently asked questions

What stains is Rust Erase Pro for?

It is designed for rust and rust stains, including common irrigation-related staining on compatible masonry and hardscape.

Can I use it on painted surfaces?

The current product information references painted surfaces, but compatibility varies. Test first and protect the surrounding finish.

Can I seal after rust removal?

Yes, after the surface has been thoroughly rinsed, the stain treatment is complete, and the substrate meets the sealer preparation requirements.

Expert buying guidanceChoose the right product with confidence.

Confirm the surface, finish, coverage, and application conditions before checkout.

Use Sealer Finder Calculate coverage Application guidance

Ultra Seal Ultimate Surface Prep

Professional product profile

Ultra Seal Ultimate Surface Prep is a commercial-grade cleaner for masonry, concrete, stone, pavers, and other compatible surfaces. It is designed to remove common residue and staining before a new sealer is applied.

Professional cleaner used to prepare brick pavers before sealing

FinishClean, profiled substrate

SystemSynthetic acid surface-preparation cleaner

Best forBrick pavers, concrete, natural stone, exposed aggregate, block, terra cotta, stucco, and compatible decking

ApplicationDilute, apply, dwell briefly, agitate if needed, and pressure rinse

Surface preparation

Product performance overview

Professional cleaning begins by identifying the substrate and the soil. Oil, organic growth, efflorescence, embedded dirt, and coating residue require different chemistry, dwell time, agitation, and rinsing. A clean-looking surface can still retain residue that affects the next treatment.

Key advantages

What this product is designed to deliver

Purpose-built for pre-sealing preparation
Useful on a broad range of masonry and hardscape surfaces
Can be downstreamed when the equipment and dilution are appropriate
Helps remove residue that can interfere with sealer adhesion

Recommended uses

Where it performs best

Surface preparation, organic staining, irrigation staining, rust residue, efflorescence, and sealer-ready cleaning.

Coverage planning

Measure before ordering

Current cleaning guidance begins at approximately 1 part product to 10 parts water; adjust only according to the label and soil load.

Open the Coverage Calculator

Job planning

Build the application around product requirements

Document the condition, protect adjacent materials, test the selected dilution in a small area, control dwell time, agitate only as appropriate, rinse thoroughly, and inspect the dry surface before proceeding.

Four-stage process

Application overview

Remove loose debris and protect glass, plants, metals, and adjacent finishes.
Dilute according to the label and test a small area.
Apply, allow a short controlled dwell, and pressure rinse thoroughly.
Confirm the surface is clean, sound, and at the correct moisture condition before sealing.

Product questions

Frequently asked questions

What is Ultimate Surface Prep used for?

It is a pre-sealing cleaner for compatible masonry, concrete, stone, pavers, and related surfaces.

Can it remove rust and irrigation stains?

The current product information lists irrigation and rust stains among its cleaning applications. Test first and use the label directions.

Why is surface preparation important?

Sealers need a clean, sound, compatible substrate. Residue, oil, old coating, or trapped moisture can reduce adhesion and change the final appearance.

Expert buying guidanceChoose the right product with confidence.

Confirm the surface, finish, coverage, and application conditions before checkout.

Use Sealer Finder Calculate coverage Application guidance

Ultra Seal Eco Shield Dry Look Penetrating Concrete Sealer

Professional product profile

Ultra Seal Eco Shield is a penetrating concrete sealer for projects that need water repellency and mineral-surface protection without a glossy film. It is designed for concrete, masonry, natural stone, and compatible porous surfaces.

Natural look penetrating sealer protecting concrete patio and natural stone

FinishDry / natural look

SystemWater-based penetrating sealer and densifier

Best forConcrete, pavers, natural stone, masonry, and compatible porous surfaces

ApplicationSprayer, roller, or brush after moisture and absorption checks

Natural-look protection

Product performance overview

Penetrating protection is chosen when the goal is to reduce water and contaminant absorption without creating a glossy surface film. Porosity, absorption rate, moisture, prior treatments, and the material itself determine whether the product can penetrate and perform as intended.

Key advantages

What this product is designed to deliver

Penetrating protection without a heavy gloss
Breathable water-repellent treatment
Helps resist moisture, salts, and freeze-thaw stress
Natural-looking finish for porous mineral substrates

Recommended uses

Where it performs best

Concrete patios, walls, foundations, pavers, natural stone, and other surfaces where a natural appearance is preferred.

Coverage planning

Measure before ordering

Coverage depends on porosity and absorption. Use the Coverage Calculator and perform a moisture test before application.

Open the Coverage Calculator

Job planning

Build the application around product requirements

Identify the substrate, remove soil and residue, allow the surface to reach the required moisture condition, verify absorption, calculate material from tested coverage, and remove excess product exactly as directed.

Four-stage process

Application overview

Remove dirt, wax, mildew, oil, loose material, and old incompatible coatings.
Verify the substrate is absorbent and check for trapped moisture before application.
Apply evenly and avoid puddles, runs, or unabsorbed material.
Allow the product to cure and keep the surface protected during the initial cure period.

Product questions

Frequently asked questions

Does Eco Shield create a wet look?

No. Eco Shield is positioned as a dry-look penetrating sealer that preserves a natural appearance.

Can I use it on freshly poured concrete?

The current product information includes freshly poured concrete after it has set for the required period. Follow the current label and verify moisture conditions.

Why is a moisture test important?

Trapped moisture can interfere with absorption, curing, and final performance. Test before sealing and correct moisture problems first.

Expert buying guidanceChoose the right product with confidence.

Confirm the surface, finish, coverage, and application conditions before checkout.

Use Sealer Finder Calculate coverage Application guidance

Water Based Epoxy Concrete floor and Concrete Block Wall Waterproofer

Professional product profile

Water-Based Epoxy is a two-component floor and wall coating system for prepared concrete floors, garage and showroom floors, commercial spaces, and concrete block walls. It is also used as a primer or base system for compatible topcoats.

Water based epoxy coating applied to a prepared garage floor

FinishCoated / customizable floor finish

SystemTwo-component water-based epoxy

Best forPrepared concrete floors, garage floors, commercial floors, block walls, and compatible countertops

ApplicationMechanically prepare, mix at the specified ratio, then squeegee and roll

Protective coating system

Product performance overview

Floor and masonry coatings depend on substrate soundness, surface profile, moisture conditions, accurate proportioning, mixing quality, film thickness, recoat timing, and cure protection. Finish alone is not a reliable way to choose or apply a coating.

Key advantages

What this product is designed to deliver

Two-component coating for demanding interior applications
Water-based system with compatible urethane and epoxy topcoat options
Useful as a primer for metallic applications
Supports durable, scratch-resistant floor and wall systems

Recommended uses

Where it performs best

Garage floors, showroom floors, commercial interiors, concrete block walls, and compatible decorative coating systems.

Coverage planning

Measure before ordering

Coverage depends on porosity and system build. Current product guidance gives approximately 200–250 sq. ft. per gallon on porous block; verify the current technical data for the project.

Open the Coverage Calculator

Job planning

Build the application around product requirements

Evaluate the substrate, repair defects, remove contaminants, create the required profile, confirm moisture conditions, stage tools and materials, mix exactly as directed, and protect the coating through its full cure window.

Four-stage process

Application overview

Mechanically prepare concrete to the required profile, vacuum dust, and verify the surface is sound.
Mix Part A and Part B at the specified ratio using mechanical mixing.
Apply within the working time using the recommended squeegee and roller.
Protect the coating during cure and use only approved topcoats or compatible system components.

Product questions

Frequently asked questions

What is the mix ratio?

The current product information identifies a three-parts resin to one-part hardener ratio by volume. Always confirm the current technical data before mixing.

Can it be used on a garage floor?

Garage and showroom floors are listed applications. The concrete must be properly profiled, clean, dry, and suitable for coating.

Can I apply a topcoat?

Approved solvent- or water-based urethane and 100% solids epoxy topcoats are referenced in the current product information. Confirm compatibility before use.

Expert buying guidanceChoose the right product with confidence.

Confirm the surface, finish, coverage, and application conditions before checkout.

Use Sealer Finder Calculate coverage Application guidance

TPSS Surface Protection System

Premium paver, concrete, and stone sealers, cleaners, coatings, and removers from The Paver Sealer Store.

Choose the Right System for Every Surface

From deep cleaners and efflo removers to penetrating stone sealers, wet-look urethanes, and epoxy coatings, TPSS gives you a complete system for cleaning, protecting, and restoring hard surfaces.

Product	Type	Finish	Best For
Ultra Seal Ultimate Surface Prep	Prep Cleaner	None	Pre-cleaning & opening pores
F9 Efflorescence & Calcium Remover	Efflo Cleaner	None	White haze & calcium
Semi Transparent Color Additives	Color Tint	Semi-Transparent	Reviving faded surfaces
Ultra Seal Enhancing Impregnating Stone Sealer	Penetrating Stone Sealer	Natural / Satin	Dense stone & tile
Ultra Seal Eco Shield Dry Look	Penetrating Concrete Sealer	Dry Look	Concrete driveways & flatwork
ULTRA SEAL – Classic Gloss Wet Look Paver Sealer	2K Urethane Paver Sealer	High Gloss Wet Look	Premium paver work
UltraGloss SX – High Gloss Urethane Sealer	1K Urethane	High Gloss	Pavers, concrete & epoxy
Water Based Epoxy	2K Epoxy	Satin / Semi-Gloss	Interior floors & block walls
Rust Erase Pro	Rust Remover	None	Rust & orange staining
Melt Away Paint Stripper	Sealer / Paint Remover	None	Stripping failed coatings

TPSS Product Catalog

Ultra Seal Ultimate Surface Prep

Commercial-grade synthetic acid cleaner that removes organic stains, efflorescence, and rust from concrete, pavers, and stone — the ideal first step before sealing.

Key Features

Synthetic acid formulation safer than raw muriatic
Targets organic staining, efflorescence, and rust
Commercial-grade strength for professional results
Designed specifically as a pre-seal prep cleaner

Key Benefits

Deep-cleans and opens pores for better sealer penetration
Helps prevent sealer whitening and failure
Restores original surface color and clarity
Reduces callbacks and rework

Surfaces

Concrete pavers, brick pavers, concrete slabs, masonry, and many natural stones (always test first).

Sizes

1 Gallon, 5 Gallon Pail, Case (4×1 Gallon).

F9 Efflorescence & Calcium Remover

Professional efflorescence and mineral remover that dissolves white haze and calcium deposits from brick, pavers, and concrete.

Key Features

Professional acid-based efflorescence & calcium remover
Dissolves mineral build-up and white haze
Concentrated formula—dilute to match soil level
Works on horizontal and vertical surfaces

Key Benefits

Restores original color on pavers and concrete
Reduces risk of sealer whitening caused by salts
Saves time on heavily stained or older surfaces

Surfaces

Clay and concrete pavers, brick, block, poured concrete, masonry walls.

Sizes

1 Gallon, Case (4×1 Gallon).

Semi Transparent Color Additives, Dyes, Stains and Tints

Tint and revive faded pavers and concrete by adding concentrated, semi-transparent color to compatible water-based sealers.

Key Features

Colorfast, blendable pigment system
Designed for compatible water-based sealers
Adjustable loading for subtle wash or stronger stain
Multiple colors for custom matching

Key Benefits

Restores color to sun-faded surfaces
Lets you shift tone warmer, cooler, richer
Keeps natural texture visible (semi-transparent)

Surfaces

Concrete pavers, poured concrete, stamped concrete, some natural stone (test first).

Sizes

Small bottles sized to tint 5-gallon pails (see label for load rates).

Ultra Seal Enhancing Impregnating Stone Sealer

Penetrating enhancing sealer for dense natural stone and tile when you want subtle color enrichment with minimal surface film.

Key Features

Penetrating, impregnating sealer
Formulated for dense, smooth surfaces
Subtle enhancement and stain protection
Breathable, non-yellowing protection

Key Benefits

Gives stone a richer tone without a glossy coating
Helps protect dense stone from staining
Ideal where slip and glare must be minimized

Surfaces

Quarry tile, unglazed ceramic tile, slate, unfinished marble, terrazzo, travertine, smooth cement.

Sizes

1 Gallon, 5 Gallon Pail.

Ultra Seal Eco Shield Dry Look Penetrating Concrete Sealer

Penetrating, breathable, dry-look sealer that protects concrete and masonry from water, salt, and freeze–thaw damage without changing the appearance.

Key Features

Penetrating, breathable sealer
Dry-look finish—no gloss
Helps reduce water absorption and salt damage
Low-VOC, environmentally conscious formula

Key Benefits

Protects driveways and flatwork from spalling and scaling
Helps prevent efflorescence and moisture problems
Maintains natural concrete appearance

Surfaces

Concrete driveways, sidewalks, patios, masonry flatwork and walls.

Sizes

1 Gallon, 5 Gallon Pail.

ULTRA SEAL – Classic Gloss Wet Look Paver Sealer

Two-component water-based urethane paver sealer that delivers a deep wet look, high gloss, and strong joint sand stabilization.

Key Features

2-component water-based urethane
Wet look with high-gloss finish
Stabilizes joint sand up to typical paver joint depths
UV and chemical resistant

Key Benefits

Delivers premium "showroom" driveway look
Locks in joint sand to reduce washout and weeds
One-day clean, sand, and seal system in many climates

Surfaces

Concrete pavers on driveways, walkways, patios, pool decks (texture permitting).

Sizes

Two-component kits (see store for kit sizes).

UltraGloss SX – High Gloss Urethane Sealer

Single-component high-gloss urethane sealer that delivers a bold wet look and durable protection on pavers, concrete, stone, and epoxy floors.

Key Features

Single-component high-gloss urethane
Designed for pavers, concrete, stone, and epoxy floors
UV, stain, and abrasion resistant
Film-forming, durable topcoat

Key Benefits

Creates a bold, high-gloss wet look
Ideal for premium driveways and decorative concrete
No mixing—ready to use out of the pail

Surfaces

Concrete and brick pavers, decorative concrete, natural stone where gloss is acceptable, epoxy floors.

Sizes

1 Gallon, 5 Gallon Pail.

Water Based Epoxy Concrete Floor and Concrete Block Wall Waterproofer

Two-component water-based epoxy coating for interior concrete floors and block walls needing a tough, waterproof, scratch-resistant finish.

Key Features

Two-component water-based epoxy
Self-priming on prepared concrete
Waterproofs block walls and floor surfaces
Available in clear and tinted bases

Key Benefits

Provides a hard, scratch-resistant surface
Reduces dusting and makes cleaning easier
Ideal for basements, utility rooms, and shop floors

Surfaces

Interior concrete floors, basement floors, concrete block walls, utility and storage areas.

Sizes

1 Gallon kit and larger kits (resin + hardener).

Rust Erase Pro – Professional Grade Stain & Rust Remover

Powerful rust stain remover that dissolves rust and orange sprinklers or battery stains from concrete, pavers, stucco, and more.

Key Features

Professional-grade rust and stain remover
Works on concrete, stucco, brick, painted surfaces, and more
Fast-acting formula—visible results in minutes
Easy to apply with brush, sprayer, or roller

Key Benefits

Eliminates ugly rust and irrigation staining
Helps save driveways and patios that look beyond repair
Perfect prep before sealing stained surfaces

Surfaces

Concrete pavers, slabs, brick, block, stucco, many painted surfaces (always test first).

Sizes

1 Gallon, Case (4×1 Gallon).

Melt Away Paint Stripper – Fast, Effective Coating Remover

Bio-based paint and paver sealer remover that strips multiple layers of acrylics, epoxies, enamels, and sealers in a single application.

Key Features

Bio-degradable, non-flammable stripping technology
Removes multiple layers of sealer, paint, and epoxy
Water-soluble for easier clean-up
Methylene chloride and caustic free

Key Benefits

Corrects failed, whitening, or over-applied sealer
Safer alternative to harsher solvent strippers
Helps reset surfaces so you can reseal correctly

Surfaces

Pavers with old or failed sealer, concrete slabs and drives, masonry and other coated surfaces (always test first).

Sizes

1 Gallon, Case (4×1 Gallon).