Rust Erase Pro – Professional Grade Stain & Rust Remover

Professional Grade Rust and Rust Stain Remover

Make rust removal easy with Rust Erase. Erase rust stains from most concrete and painted surfaces in minutes. Surface and heavy rust melt away from stucco, brick, patios, sidewalks, fences, and more.


Apply with a sponge, brush, sprayer, or roller. Protect your skin with rubber gloves while applying.

For rust removal on painted surfaces, apply allow to soak for 1-2 minutes. Rinse with clear water. If necessary, reapply as needed.

On concrete surfaces, apply and let dry completely before rinsing with clear water.


Rust Erase Pro – Professional Grade Stain & Rust Remover

Additional information

Weight11 lbs
Dimensions7 × 7 × 12 in

1 Gallon, Case (4 Gallons)


The Paver Sealer Store


  • Removes multiple layers in one application.
  • Effective on paver sealer, pint, acrylic sealers, epoxies & enamels
  • Strong emulsifier package lifts sealer in 15-20 minutes
  • Water soluble clean rinse technology
  • Sprayable VOC compliant
  • Methylene chloride and caustic free
  • Non Flammable
  • Dual action – lifts and emulsifies the coating
  • Bio-degradable and Environmentally Friendly
  • Ships DOT Non-Flammable, Non-Hazardous to all 50 states including California

Warrantied against material free of defects.  Not warrantied against labor.

Application Instructions:

Pour contents into a pump-up sprayer system, cover and or dampen with water any grass, plants, or flowers they may encounter with overspray, then uniformly apply a flood coat of Melt Away . Hold sprayer tip 12” from the surface while spraying and let dwell for 15-20 minutes (excessive layers may need longer dwell times or reapplication) until sealer and other coatings start to turn grayish or shows signs of peeling.

Using a plastic putty knife, you should be able to scrape the coating from the substrate. At this point it is ready to rinse utilizing a pressure washer with a turbo tip. The use of a fan tip as zero tip is not recommended as it will leave etch the substrate. Melt Away Paint Stripper and paver sealer remover can also be applied using a ½ nap roller as well.

Distributed by , LLC