Clear Pink Stuff

Clear Pink Stuff is a professional-grade highly-concentrated acid cleaner.

Clear Pink Stuff is a highly concentrated cleaner. For best results use one part of Clear Pink Stuff to 50 parts of cold water. Apply solution with brush or spray starting at the bottom and working upwards. Allow to stand two or three minutes, then rinse with cold water. For difficult to clean surfaces, repeat if needed, allowing Clear Pink Stuff to remain a little longer before flushing with water. DO NOT allow Clear Pink Stuff to come in contact with windshields or glass.

$35.00

Clear Pink Stuff

Description

Inhalation: Remove affected person to fresh air; get immediate medical attention with emphasis on hydrofluoric acid exposure. If breathing is difficult, supply oxygen. If breathing has stopped, begin artificial respiration.

Skin: Remove contaminated clothing while flushing affected area with drenching shower for 5 minutes. Launder contaminated clothing before reuse; seek immediate medical attention with emphasis on hydrofluoric acid exposure. Apply 2.5% Calcium Gluconate ointment to contacted area.

Eyes: Check for and remove contact lenses. Immediately flush eyes for 5 minutes in clear running water while holding eyelids open; seek immediate medical attention with emphasis on hydrofluoric acid exposure. Irrigate open eyelids with 500 to 1,000 cc’s of 1% Calcium Gluconate in saline solution.

Ingestion: Drink high amounts of calcium based antacid in water followed by milk or milk of magnesia; DO NOT induce vomiting; never give anything by to an unconscious person; seek immediate medical attention with emphasis on hydrofluoric acid exposure

Additional information

Weight11 lbs
Dimensions7 × 7 × 12 in

FOR CLEANING:

  • Brick Pavers
  • Irrigation Stains
  • Rust Stains
  • Limestone
  • Brownstone
  • Unpolished Marble
  • Precast
  • Exposed Aggregate
  • Concrete
  • Brick
  • Block
  • Terra Cotta
  • Vinyl
  • Metals
  • Wood
  • Synthetic Decking
  • Stucco
  • Sealer Cleaning
  • Unpolished Natural Stone
  • 10:1 Dilution – (can be downstreamed)

Do not allow to come in contact with glass.

Application: Dilute 1 part Ultimate Surface Prep with 10 parts water.  Apply and let dwell for two to three minutes before pressure washing surface. Rinse well.  Heavy staining might require additional applications.