Description
UltraGloss SX is a ready-to-use 1K urethane sealer for pavers, concrete, brick, natural stone, and compatible epoxy floors. It is built for a bold wet-look finish without the mixing step required by a two-component system.
Product performance overview
Wet-look and high-gloss sealers should be selected by substrate porosity, the condition of any existing coating, joint condition, desired sheen, weather, and cure window. Film build and appearance depend on thin, controlled application over a properly prepared surface.
What this product is designed to deliver
- No catalyst or batch mixing
- Deepens color with a glossy wet look
- Helps protect against water, oil, stains, UV exposure, and everyday wear
- Useful as a high-gloss topcoat when the substrate is compatible
Where it performs best
Driveways, patios, pool decks, walkways, decorative concrete, and other exterior hardscapes.
Measure before ordering
Coverage changes with porosity, profile, and application method. Use the Coverage Calculator before ordering.
Open the Coverage CalculatorBuild the application around product requirements
Confirm the old coating and substrate are compatible, remove contaminants and failed material, repair joints as needed, measure the area, make a representative test patch, and apply only within the product-specific weather and recoat requirements.
Application overview
- Clean, profile, and dry the surface according to the product directions.
- Test a small area to confirm adhesion, color, and final gloss.
- Apply thin, even coats and avoid puddling or overworking the sealer.
- Respect the label dry and return-to-service times before foot or vehicle traffic.
Technical noteSurface compatibility, weather, moisture, dilution, mixing, dwell time, and cure requirements vary by product. Read the current label and SDS, test a small area, and follow the product-specific technical directions before full application.
Frequently asked questions
Is UltraGloss SX a two-part sealer?
No. UltraGloss SX is a single-component 1K urethane. Do not add a catalyst or hardener.
What finish does UltraGloss SX create?
It is designed for a high-gloss, wet-look finish that enhances the existing color and texture of compatible pavers and concrete.
How much do I need?
Porosity and application method have a major effect on coverage. Measure the area and use the Coverage Calculator before choosing a size.
Confirm the surface, finish, coverage, and application conditions before checkout.
