A Guide to Sealing Pavers Wet Look

sealing-pavers-wet-look

Should I seal pavers? Ts a question you might ask If you’ve recently decided to build a paver patio, walkway, or driveway… or if you’re looking to reseal an area that’s been sealed in the past… then you may have considered using a sealer to create a sealing pavers wet look. Many people opt for a glossy finish because they appreciate the more eye-catching appearance and recognize that wet look sealers offer slightly better protection against stains than matte finishes.

If you’ve been thinking about going for that sealing pavers wet look, then we’ve got the guide for you. You’ll find everything you need to know about this beautiful and practical finish below…

sealing-pavers-wet-look

When sealing paver bricks, it’s possible to achieve a sealing pavers wet look finish. This guide will show you how sealing the paver brick can create this finish. Following these instructions will result in a glossy and very stylish sealer for your bricks! The sealing pavers wet look is unique because it has both shine and protection. The shiny appearance gives off an eye-catching vibe while the sealant offers protection against stains and dirt that may become embedded into the pores of the brick over time. Let’s get started!

What Kind of Sealer Offers a Sealing Pavers Wet Look?

There are hundreds of paver sealers on the market today. But not all sealers are created equal. Not only can you find water-based and solvent-based sealers, you can also find sealers that offer a variety of finishes, from matte to high-gloss.

So, how do wet look sealers work?

Wet look sealers work by leaving a coat of polymers on the surface of your sealers, darkening the overall color of your pavers and leaving a sheen. This leaves your pavers looking as if they’ve been misted with a light spray of water.

Why Should I Opt for a Wet Look Paver Sealer?

high-gloss-concrete-sealer

Sealing pavers with a wet look offers several advantages over other kinds of sealant, including…

  • Improved protection. One of the primary reasons that you’ll want to seal your pavers is because of the added protection they give. Sealed pavers will make it much easier to clean grease, oil, and food stains from your pavers. They’ll also keep unwanted vegetation from growing up between your pavers. And they’ll give your whole area a greater stability by guarding against water eroding the base of your pavers. Although any kind of sealer will give you this kind of protection, wet look sealers tend to work even better than their non-wet look counterparts.
  • Improved aesthetics. Many people opt for sealing pavers with a wet look because of the appearance they provide. There’s something special about the darkened colors and light shine that a wet look sealer offers.

How Do You Apply A Wet Look Sealant?

paver-sealer-near-me

Applying wet look sealant is the same as applying any other kind of sealer. It’s a fairly simple, three-step process…

  1. Clean your paver area. The first thing you’ll want to do before adding your wet look sealer is to clean the paver surface completely. Make sure to remove any stains, contaminants, etc. And let it completely dry so that there’s no moisture on the surface of your pavers. You want to ensure that there’s no dust or impurities on the paver before sealing it. Use a broom, hose, or shop vacuum to get rid of the impurities on the surface.
  2. You need to choose either a solvent water based sealing product. A solvent paver sealing product will dry more quickly. Then again, a water based sealing product is easier to clean up if you make a mistake while sealing your pavers.
  3. Next, you need to figure out how much sealing agent you’re going to need . Some products come in containers with dimensions on the label that can help with this task…
  4. Make sure to follow product instructions for mixing your sealing agent exactly! Even small deviations from the recommended ratios can drastically affect how well your sealed pavers will turn out.
  5. Apply your sealant. After your paver surface is clean and dry, you can apply your sealant with a sprayer. Although you can technically use a roller, by using a normal garden sprayer to apply the sealant, you’ll be able to achieve a more uniform coat that won’t leave you with splotches of heavy sealant here and there.
  6. Let your sealant cure. Once your coat (or coats, depending on the look you want) is applied, let it cure for at least 24 hours. After it’s cured, you can resume normal foot traffic.
  7. As long as you mix your sealing agent per product instructions and you’re applying the sealer correctly too your bricks, then your sealing pavers will turn out great with a shiny finish perfect for any setting!
travertine-sealer

So there ya have it – the whole sealing paver wet look guide in a quick five steps! Can you believe how easy it is? If this kind of stuff intrigues you, give us a call today or leave us a message below if you have more questions about sealing bricks. Don’t forget to check out our sealing pavers wet look FAQ tab if you want to learn more without committing to sealing pavers wet look right now!

It’s that simple. After your sealer has been applied, it’s time to pull up that lawn chair, sit back, and enjoy the look of your sealing pavers wet look.

For that “wet look”, check out SealThane paver sealer.

Share the Post:

Related Posts

Join Our Newsletter