Sealer for Brick Pavers: Why it Matters & How to Take Advantage of It

paver-sealer-near-me

People have been using bricks to build structures and walkways for thousands of years – and for good reason. They’re strong, can stand up to the elements, are easy to install, and are versatile enough to provide a practical solution that’s also beautiful. But if you fail to use sealer for brick pavers, you’ll lose many of those advantages.

Read about Paver Sealant: Protecting and Enhancing your Pavers

So, sealing your brick pavers is vital for the long-term maintenance of your patio, walkway, or driveway. Here are several key reasons that using sealer for brick pavers matters (and how to take advantage of it)…

sealer-for-brick-pavers

Why Use Sealer for Brick Pavers…

Protects your pavers from the elements. By using sealer for your bricks, you’ll be protecting them from the elements. This includes UV rays from direct sunlight (which can cause your bricks to fade), freezing and thawing moisture (which can cause spalling), and unwanted foliage, such as weeds (which can make your pavers look dilapidated).

Protects your pavers from stains. Brick pavers are often located where oil, food, and grease are prevalent. If any of those contaminants (or any others) wind up on your pavers, they can seep down into the pores of your bricks and permanently stain them. But your brick pavers can be protected. By sealing them, you’ll leave them with a protective coat that will repel stains and keep impurities from penetrating the surface of your bricks.

brick-paver-sealer

Prevents sand erosion. If your pavers are installed correctly, they will have sand in the joints between them. This provides support and keeps your bricks from shifting or buckling. But as we all know, sand can easily be blown away or removed. By using sealer for brick pavers, you’ll create a coating over your paver joints to make sure that the joint sand remains exactly where it’s supposed to, maintaining your overall design for longer.

Enhances the look of your pavers. Not only will sealer for brick pavers offer protection, it will also enhance the look of your pavers. This is true whether you use a wet look sealer to obtain a high gloss finish or go with a matte finish that merely brings out the brick’s natural colors. Either way, your brick pavers will look their best if you coat them with a layer of sealant.

Taking Advantage of Sealer for Brick Pavers

paver-sealer-wet-look

Find the right sealer. Although you can choose from water-based or solvent-based sealer, most people will want to go with water-based since it’s less hazardous, better for the environment, and just as effective. So, choose a water-based sealer that’s designed for brick pavers and offers the look that you’re searching for.

Clean your paver surface. Before applying your sealer for brick pavers, make sure that your paver surface is clean of any contaminants or dirt (you can use soap and water or a power washer to take care of this). Then, let it completely dry so moisture isn’t able to get under your sealant. Unless you’re using SealThane or Paver Seal RX, both water based sealers that can be applied on a damp substrate. (As long as there is no puddling of water)

Spray a coat of sealer on. Once you’ve got a clean space to work, you can use a normal pump sprayer to apply your sealer evenly across the bricks and their joints. After you’re finished, let it dry for 15-30 minutes or so before applying a second another coat. After you’ve gotten the coverage you need, allow the space to cure for at least 24 hours before resuming normal traffic.

Check out this article on 23 Reasons to Seal Pavers!

Ready to seal your pavers? Take a look at our industry best sealing products or contact us for more information!

Share the Post:

Related Posts

Join Our Newsletter