ICT

F9-doubloe-eagle-1-gallon

F9 Double Eagle

$49.00 – $180.00

Select options
f9-efflo-remover-case

F9 Efflorescence & Calcium Remover

$56.00 – $209.00

Select options
F9BARC-gallon-jugs

F9 Barc

$56.00 – $209.00

Select options
agg-sealer-catalina-chemical-888

AGG Sealer Formula 888

$79.00 – $325.00

Select options
rust erase pro 1 gal

Rust Erase Pro – Professional Grade Stain & Rust Remover

$29.50 – $114.00

Select options
A red inked rubber stamp, with a grungy texture to simulate the effect of ink on paper. AI10 EPS is saved in a CMYK color space for optimal printing.

Ultra Seal Ultimate Surface Prep

$32.95 – $159.75

Select options
A red inked rubber stamp, with a grungy texture to simulate the effect of ink on paper. AI10 EPS is saved in a CMYK color space for optimal printing.

Ultra Seal Penetrating Natural Stone Sealer

$279.00

Add to cart
terratone-467

TERATONE 467

$70.00 – $285.00

Select options
clean-up-efflorescence-remover

Clean Up Efflorescence Remover

$34.87

Add to cart
clear-pink-stuff

Clear Pink Stuff

$35.00

Add to cart
A red inked rubber stamp, with a grungy texture to simulate the effect of ink on paper. AI10 EPS is saved in a CMYK color space for optimal printing.

Ultra Seal Eco Shield Dry Look Penetrating Concrete Sealer

$229.00

Add to cart
magic-water-repellent

MAGIC: Water Repellent & Protector

$70.00

Add to cart
A red inked rubber stamp, with a grungy texture to simulate the effect of ink on paper. AI10 EPS is saved in a CMYK color space for optimal printing.

Ultra Seal Enhancing Impregnating Stone Sealer

$119.95 – $479.87

Select options
Epoxy-garage-floor

Water Based Epoxy Concrete floor and Concrete Block Wall Waterproofer

$109.87

Select options
melt away paint stripper pail with label (1)

Melt Away Paint Stripper – Fast, Effective Coating Remover

$57.00 – $269.00

Select options
Ultra-seal-pail-with-label (1)

ULTRA SEAL – Classic Gloss Wet Look Paver Sealer

$279.00

Add to cart

Semi Transparent Color Additives, Dyes, Stains and Tints

$38.95

Select options
Seal RxHD Logo

Seal RX Enhance

$179.00

Add to cart
Paver Seal Rx 5 gal

Paver Seal RX – 5 Gallon

$221.75

Add to cart
Paver Seal Rx 1 gal

Paver Seal RX – 1 Gallon

$56.00

Add to cart

Clear Pink Stuff

Inhalation: Remove affected person to fresh air; get immediate medical attention with emphasis on hydrofluoric acid exposure. If breathing is difficult, supply oxygen. If breathing has stopped, begin artificial respiration.

Skin: Remove contaminated clothing while flushing affected area with drenching shower for 5 minutes. Launder contaminated clothing before reuse; seek immediate medical attention with emphasis on hydrofluoric acid exposure. Apply 2.5% Calcium Gluconate ointment to contacted area.

Eyes: Check for and remove contact lenses. Immediately flush eyes for 5 minutes in clear running water while holding eyelids open; seek immediate medical attention with emphasis on hydrofluoric acid exposure. Irrigate open eyelids with 500 to 1,000 cc’s of 1% Calcium Gluconate in saline solution.

Ingestion: Drink high amounts of calcium based antacid in water followed by milk or milk of magnesia; DO NOT induce vomiting; never give anything by to an unconscious person; seek immediate medical attention with emphasis on hydrofluoric acid exposure

Ultra Seal Eco Shield Dry Look Penetrating Concrete Sealer

SURFACE PREPARATION

For freshly poured concrete: Apply after concrete sets for at least 24 hours. Make sure no water puddles are present. Concrete may be slightly wet before applying.

For fully cured concrete: Remove all dirt, wax, dust, mildew, and loose or scaling material with a scraper, wire brush, or stiff bristle brush. Grease, wax, and oil should be removed by scrubbing with CLEAR PINK STUFF or a heavy duty detergent in warm water. Rinse thoroughly with clean water. Allow to dry. If using a pressure washer, do not use on a pressure setting above 1750 psi to avoid damaging the concrete. Remember, concrete acts like a sponge – pressure washing and general cleaning may trap residual moisture in the concrete. To check for trapped moisture, tape a 12”x12” piece of 3 mil plastic or aluminum foil tightly on all four edges to the surface. Remove it after 24 hours. If the floor side of the plastic or foil is damp, allow additional drying and repeat the test.

EFFLORESCENCE: A white, powdery, crystal-like deposit visible on the masonry surface, should be removed. CLEAN UP EFFLORESCENCE REMOVER or muriatic acid, used according to manufacturer’s directions, are effective efflorescence removal agents. All masonry surfaces are subject to occurrences of efflorescence. Properly prepared concrete should look and feel like medium grit sandpaper. If concrete remains smooth, repeat etching procedure. Test concrete porosity by sprinkling a few drops of water on to the surface in several areas. If the water is readily absorbed, you are ready to paint. If it beads or lays on the surface, additional cleaning and etching is needed. Rinse thoroughly with clean water and allow to dry for 24 hours.

NOTE: Rinse etching solutions thoroughly. Etching solutions allowed to dry on masonry surfaces prevent proper curing of ECO SHIELD DRY LOOK PENETRATING CONCRETE SEALER and may result in the ECO SHIELD DRY LOOK PENETRATING CONCRETE SEALER appearing milky when dry. Patch all holes and cracks with a masonry crack filler or a suitable cement-based patching compound. Be sure to smooth the patch evenly. Allow the patched area to dry thoroughly.

APPLICATION

Apply only when air and surface temperature is above 50° F and humidity below 70%. Do not apply if raining or if it will rain within 48 hours of application. ECO SHIELD DRY LOOK PENETRATING CONCRETE SEALER appears milky in the pail but dries clear. Apply by brush, roller, spray, or squeegee. Spread evenly – do not allow puddles or a heavy surface film to
occur. Apply one coat using thin even strokes. Extremely porous surfaces may require a second coat. Allow 6 hours drying time between coats. Additional coats will cause surface to be
slippery when wet. On light-colored surfaces, some darkening may take place; test in an inconspicuous area to be sure darkening does not occur. May be applied to surfaces previously coated with a similar treatment. For best results, test a small area for proper adhesion prior to coating entire surface.

THINNING
Due to variations in porosity, when applied over flagstone, slate, terrazzo, dense smooth or light colored concrete, thin with clean, moderately warm water 10%—20% to minimize sheen.

In addition, light colored concrete may darken unevenly due to variations in porosity. Test on a small area to see final effect.

MAGIC: Water Repellent & Protector

MAGIC is a deep penetrating, siloxane water repellant which produces a transparent protective barrier across the surface of a stone. MAGIC fills the pores and capillaries of the stone, and forms an invisible, vapor permeable membrane across the surface. This coating repels moisture from the surface while allowing the stone to breathe. MAGIC has no visible film, and leaves surfaces looking natural with no change in appearance.

MAGIC inhibits mold, mildew, and efflorescence, as well as damage caused by the constant absorption and evaporation of water from the stone. MAGIC penetrates immediately, deeply, and effectively, providing a long lasting protective barrier.

For use on Brick, Brick Pavers, Unglazed Ceramic Tile, Clay Tiles, European Clay Pavers, Concrete, Grout Joints, Saltillo Tiles, Travertine, Marble, Granite, or any stone surface when a natural look is desired. MAGIC serves as an excellent grout release. For interior or exterior use.

Water Based Epoxy Concrete floor and Concrete Block Wall Waterproofer

Typical Applications:
Retail and Commercial Flooring
Concrete block walls.
Garage and Showroom Floors
High-Traffic Interior Applications

Approved Topcoats:
Solvent or Water-Based Urethane and 100 solids .
Also approved for wood, concrete and laminate countertops

Surface Prep & Priming:
Grind concrete floors to CSP-3, vacuum dust, wipe with
Denatured alcohol.

Mixing:
Three parts A to 1-part B by volume.
Mixing full kits Add premeasured Part B to Part A Mix for
2 minutes with mechanical mixing. Wearing spike shoes
immediately pour mixed material on the floor and
spread using a flat squeegee or for smaller projects can
be dipped and rolled using 3/8” epoxy roller.

Metallic Applications:
Excellent primer for metallic applications. Premixed
black primer kits available.

Coverage:

1 gallon will cover approximately
Porous Concrete block 200-250 sq.ft./gal.
Receiver coat for vinyl chips 200-250 sq.ft./gal Clear

Finish Coat 250-300 sq.ft./gal.

Best if applied at temperatures between
55-90 degrees Fahrenheit.

Broadcasting Vinyl Chips:
Apply pigmented epoxy basecoat at 200 sq.ft. per gallon
Vinyl flake on 250 sq.ft.

Light 1lb. Heavy 4lbs. Full 25lbs.

After epoxy is spread and back rolled divide chips in
equal portions then throw vinyl chips upwards let them
drop in the wet epoxy. Let cure 24hrs. Then scrape and
vacuum up loose flakes. After scraping and vacuuming
several times. Apply coat of Polyaspartic Clear
or using a magic trowel pull seal coat across the flake at
180 sq. ft per gallon. A Water-Based Two Component Urethane is
also an excellent choice for low odor applications.

Dry-time & Recoat:

Tack free/foot traffic: 12 hrs. Recoat 24 hrs.
Heavy foot traffic 48 hrs. Vehicular Traffic 3 days.
Lightly sand the surface and wipe down with denatured
alcohol or acetone before applying additional coats or
finish coats.

Exterior Applications:

Unless installed as a primer with pigmented Urethane
Topcoats. Not recommended as clear epoxy will amber.

Handling, Storage, Disposal & Clean-up:

  • May irritate eyes wear gloves
  • Store in clean dry area do not freeze
  • Dispose in accordance with all state local and federal
    laws
  • Clean-up tools and equipment with water
  • Regulatory
  • Less than 250 grams/liter
  • Meets all VOC categories in US / except SCAQMD

Warranty:

Material only if proven defective, no labor

ULTRA SEAL – Classic Gloss Wet Look Paver Sealer

ULTRA – Wet Look is a two-component urethane which provides deep color enhancement and joint stabilization by locking the sand in-between the joints in place, forms a long-lasting protective barrier on the surface of the pavers or concrete, protecting them from the natural elements and the suns harmful UV rays. Not only is it user friendly, but it produces a consistent finish that wears evenly over time.

All of products are environmentally friendly, bio-degradable, will not harm vegetation, pet friendly, and are commercial quality – formulated with the contractor in mind. All products are VOC's compliant and can be used in all 50 states.

Click here for more before and after photos.

 

Seal RX Enhance

SEAL Rx ENHANCE

Seal RX Enhance Stone Sealer is a heavy duty, solvent based, silane-siloxane designed to enhance color, impart water repellency and stain resistance to a wide variety of natural stone, concrete and aggregate surfaces.  The silanes react chemically and bond with the substrate to form an insoluble water-resistant treatment within 24-72 hours after application.

__________________________________________________________________________________________

 

RECOMMENDED USES:

For properly prepared, unsealed natural stone, concrete walls, foundations, pre-cast concrete, block, brick and most aggregate surfaces.

 

SURFACE PREPARATION:

Dirt, grease, grime and any foreign material must be removed before application of SEAL Rx ENHANCE.  Treat surface for mildew.  Oil and grease should be scrubbed with a solution of TSP and water.

 

APPLICATION INFORMATION:  

Apply with brush, roller, airless sprayer or pump sprayer.  When spraying, use a tip designed for gloss coatings.  Apply when surface and air temperatures are above 32 Deg. F and rising.  Do not apply if the threat of rain exists.  Do not over apply or allow product to puddle.

 

  • Always apply a test sample to insure compatibility
  • Do not apply to a surface that was previously treated with another product
  • Take care to cover nearby vegetation, glass, plastic and metals. Seal RX 580 may damage them.
  • May be applied to damp surface, however, do not apply when standing water is present

 

SEAL Rx ENHANCE requires different application methods for smooth and porous/rough surfaces.

 

Smooth surfaces:

  1. Apply with brush, roller or spray
  2. Allow to sit for 30-45 minutes
  3. Wipe off excess material with a t-shirt type material. The excess should be removed similar to removing wax from a car.

 

Porous/Rough surfaces: No wiping is necessary as long as product penetrated and no puddles or excess material is visible.

 

 

RECOMMENDED THINNER:

SEAL Rx ENHANCE does not require thinning and should be used as is, directly from the container.

 

BENEFITS:

 

  • Enhances color of substrate.
  • Reduces water absorption into the substrate, thus reducing spalling due to freeze thaw and efflorescence, thereby increasing the life of the substrate.
  • Resists staining
  • Colorless and non-yellowing protection preserves the appearance of the substrate.
  • Penetrating & breathable
  • Low VOC
  • May be applied to damp surfaces
  • UV Resistant
  • Reduces mildew growth on surface

 

 

TECHNICAL DATA:

Finish: Enhanced look                                                          

Pigment Type:  None

Solvent Type: Solvent

Density:  8.50 lbs./Gal.

Viscosity @ 75 deg. F (24 deg. C):  Waterlike

Coating VOC: <50 g/l

 

Clean Up: Clean up drips and spills immediately using any type of solvent.  Clean tools and equipment with any type of solvent.

 

Coverage (Theoretical): Coverage will depend on porosity and contour of the surface being coated.  Coverage typically averages 600-800 square feet per gallon.

 

Storage:  After use, make sure to seal lid tightly.  SEAL Rx ENHANCE will gel if left open.

 

Environmental & Safety Information:

Improper handling or use may be hazardous.  Recommended safety precautions for storage, handling and application must be observed.

 

DANGER: 

COMBUSTIBLE!  KEEP OUT OF REACH OF CHILDREN!

Contains flammable solvents.  Causes eye burns.  Vapor is harmful.  May cause allergic skin reaction.  Do not get in eyes, on skin or on clothing.  Wear eye and skin protective equipment when handling.  Wear appropriate, properly fitted respirator (NIOSH.MSHA approved) during and after application unless air monitoring demonstrates vapor/mist levels are below applicable levels.  Follow respirator manufacturer’s recommendations for use.  Keep containers closed when not in use.

First Aid:  In case of eye contact, flush eyes immediately with plenty of fresh water for at least 15 minutes.  Call a physician.  If inhaled, remove to fresh air.  If not breathing, give artificial respiration, preferably mouth to mouth and seek immediate medical assistance.  In case of skin contact, wash immediately with soap and fresh water.  Remove contaminated clothing and launder before use.  Discard shoes if material has penetrated inside surface.

Notice:  Reports have associated repeated and prolonged occupational overexposure to solvent with permanent brain and nervous system damage.  Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal.

 

WARNING! If you scrape, sand or remove old paint, you may release lead dust.  LEAD IS TOXIC.  EXPOSURE CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN.  PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE.  Wear an NIOSH-approved respirator to control lead exposure.  Carefully clean up with a HEPA vacuum and a wet mop.  Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.

 

Technical data contained herein is true and accurate at the date of issue, but is subject to change without notice.  An Inseco representative should be contacted with any questions concerning product information or application procedures.  Our products conform to Inseco quality standards, but no other warranty is expressed or implied.  Liability, if any, is limited to the replacement of product or purchase price.