Epoxy

F9 Efflorescence & Calcium Remover

$56.00 – $209.00

Rust Erase Pro – Professional Grade Stain & Rust Remover

$29.50 – $114.00

Ultra Seal Ultimate Surface Prep

$32.95 – $159.75

Ultra Seal Penetrating Natural Stone Sealer

$279.00

Clean Up Efflorescence Remover

$34.87

Ultra Seal Eco Shield Dry Look Penetrating Concrete Sealer

$229.00

MAGIC: Water Repellent & Protector

$70.00

Ultra Seal Enhancing Impregnating Stone Sealer

$119.95 – $479.87

Water Based Epoxy Concrete floor and Concrete Block Wall Waterproofer

$109.87

Melt Away Paint Stripper – Fast, Effective Coating Remover

$57.00 – $269.00

ULTRA SEAL – Classic Gloss Wet Look Paver Sealer

$279.00

Semi Transparent Color Additives, Dyes, Stains and Tints

$38.95

Rust Erase Pro – Professional Grade Stain & Rust Remover

Ultra Seal Ultimate Surface Prep

FOR CLEANING:

Brick Pavers
Irrigation Stains
Rust Stains
Limestone
Brownstone
Unpolished Marble
Precast
Exposed Aggregate
Concrete
Brick
Block
Terra Cotta
Vinyl
Metals
Wood
Synthetic Decking
Stucco
Sealer Cleaning
Unpolished Natural Stone
10:1 Dilution – (can be downstreamed)

Do not allow to come in contact with glass.

Application: Dilute 1 part Ultimate Surface Prep with 10 parts water. Apply and let dwell for two to three minutes before pressure washing surface. Rinse well. Heavy staining might require additional applications.

Ultra Seal Penetrating Natural Stone Sealer

ADVANTAGES

Reduces water absorption into the substrate, thus reducing spalling due to freeze thaw and efflorescence, thereby increasing the life of the substrate.
Colorless and non-yellowing protection preserves the natural appearance of the substrate.
Penetrating & breathable
Water based and Environmentally Friendly
May be applied to damp surfaces
May be painted over
Inhibits mold and algae growth
Inhibits salt water infiltration

RECOMMENDED USES: For properly prepared, unsealed natural stone, concrete walls, foundations, pre-cast concrete, block, brick and most aggregate surfaces.

SURFACE PREPARATION: Substrate must be pressure washed and cleaned prior to application of Ultra Seal Penetrating Concrete Sealer and Damp Proofer. Surface should be cleaned and treated for organic growth and oil with CLEAR PINK STUFF prior to application. Efflorescence should be treated with CLEAN UP Efflorescence Remover.

APPLICATION INFORMATION: Apply with brush, roller, or pump sprayer. When spraying, use a fan or cone tip designed for water based coatings. Apply when surface and air temperatures are above 60° Fahrenheit and rising. Do not apply if the threat of rain exists within 12 hours.

Do not over apply or allow product to puddle.
Wet on Wet application – apply product until it begins to repel itself.
Wipe off excess.
Do not apply to a surface that was previously sealed with a film-forming or topical sealer
May be applied to damp surface, however, do not apply when standing water is present
May be used as a Moisture Vapor Barrier prior to applying an epoxy coating

Coverage: Coverage will depend on porosity of the substrate. Coverage averages up to 250 square feet per gallon depending on the porosity.

Clear Pink Stuff

Inhalation: Remove affected person to fresh air; get immediate medical attention with emphasis on hydrofluoric acid exposure. If breathing is difficult, supply oxygen. If breathing has stopped, begin artificial respiration.

Skin: Remove contaminated clothing while flushing affected area with drenching shower for 5 minutes. Launder contaminated clothing before reuse; seek immediate medical attention with emphasis on hydrofluoric acid exposure. Apply 2.5% Calcium Gluconate ointment to contacted area.

Eyes: Check for and remove contact lenses. Immediately flush eyes for 5 minutes in clear running water while holding eyelids open; seek immediate medical attention with emphasis on hydrofluoric acid exposure. Irrigate open eyelids with 500 to 1,000 cc’s of 1% Calcium Gluconate in saline solution.

Ingestion: Drink high amounts of calcium based antacid in water followed by milk or milk of magnesia; DO NOT induce vomiting; never give anything by to an unconscious person; seek immediate medical attention with emphasis on hydrofluoric acid exposure

Ultra Seal Eco Shield Dry Look Penetrating Concrete Sealer

SURFACE PREPARATION

For freshly poured concrete: Apply after concrete sets for at least 24 hours. Make sure no water puddles are present. Concrete may be slightly wet before applying.

For fully cured concrete: Remove all dirt, wax, dust, mildew, and loose or scaling material with a scraper, wire brush, or stiff bristle brush. Grease, wax, and oil should be removed by scrubbing with CLEAR PINK STUFF or a heavy duty detergent in warm water. Rinse thoroughly with clean water. Allow to dry. If using a pressure washer, do not use on a pressure setting above 1750 psi to avoid damaging the concrete. Remember, concrete acts like a sponge – pressure washing and general cleaning may trap residual moisture in the concrete. To check for trapped moisture, tape a 12”x12” piece of 3 mil plastic or aluminum foil tightly on all four edges to the surface. Remove it after 24 hours. If the floor side of the plastic or foil is damp, allow additional drying and repeat the test.

EFFLORESCENCE: A white, powdery, crystal-like deposit visible on the masonry surface, should be removed. CLEAN UP EFFLORESCENCE REMOVER or muriatic acid, used according to manufacturer’s directions, are effective efflorescence removal agents. All masonry surfaces are subject to occurrences of efflorescence. Properly prepared concrete should look and feel like medium grit sandpaper. If concrete remains smooth, repeat etching procedure. Test concrete porosity by sprinkling a few drops of water on to the surface in several areas. If the water is readily absorbed, you are ready to paint. If it beads or lays on the surface, additional cleaning and etching is needed. Rinse thoroughly with clean water and allow to dry for 24 hours.

NOTE: Rinse etching solutions thoroughly. Etching solutions allowed to dry on masonry surfaces prevent proper curing of ECO SHIELD DRY LOOK PENETRATING CONCRETE SEALER and may result in the ECO SHIELD DRY LOOK PENETRATING CONCRETE SEALER appearing milky when dry. Patch all holes and cracks with a masonry crack filler or a suitable cement-based patching compound. Be sure to smooth the patch evenly. Allow the patched area to dry thoroughly.

APPLICATION

Apply only when air and surface temperature is above 50° F and humidity below 70%. Do not apply if raining or if it will rain within 48 hours of application. ECO SHIELD DRY LOOK PENETRATING CONCRETE SEALER appears milky in the pail but dries clear. Apply by brush, roller, spray, or squeegee. Spread evenly – do not allow puddles or a heavy surface film to
occur. Apply one coat using thin even strokes. Extremely porous surfaces may require a second coat. Allow 6 hours drying time between coats. Additional coats will cause surface to be
slippery when wet. On light-colored surfaces, some darkening may take place; test in an inconspicuous area to be sure darkening does not occur. May be applied to surfaces previously coated with a similar treatment. For best results, test a small area for proper adhesion prior to coating entire surface.

THINNING
Due to variations in porosity, when applied over flagstone, slate, terrazzo, dense smooth or light colored concrete, thin with clean, moderately warm water 10%—20% to minimize sheen.

In addition, light colored concrete may darken unevenly due to variations in porosity. Test on a small area to see final effect.

MAGIC: Water Repellent & Protector

MAGIC is a deep penetrating, siloxane water repellant which produces a transparent protective barrier across the surface of a stone. MAGIC fills the pores and capillaries of the stone, and forms an invisible, vapor permeable membrane across the surface. This coating repels moisture from the surface while allowing the stone to breathe. MAGIC has no visible film, and leaves surfaces looking natural with no change in appearance.

MAGIC inhibits mold, mildew, and efflorescence, as well as damage caused by the constant absorption and evaporation of water from the stone. MAGIC penetrates immediately, deeply, and effectively, providing a long lasting protective barrier.

For use on Brick, Brick Pavers, Unglazed Ceramic Tile, Clay Tiles, European Clay Pavers, Concrete, Grout Joints, Saltillo Tiles, Travertine, Marble, Granite, or any stone surface when a natural look is desired. MAGIC serves as an excellent grout release. For interior or exterior use.

Ultra Seal Enhancing Impregnating Stone Sealer

Ultra Seal Enhancing Impregnating Natural Stone Sealer is a color enhancing, slow drying, deep penetrating, solvent based acrylic sealer for interior or exterior use. Ultra Seal Enhancing Impregnating Natural Stone Sealer's slow drying nature allows it to penetrate deep before setting. Will enhance the natural colors of most surfaces. Very effective at sealing and protecting dense and smooth surfaces such as quarry tile, ceramic tile, slate, unfinished marble, terrazzo, travertine, smooth cement, and all other cementitious materials. Recommended for use on unglazed surfaces when NO gloss or a SATIN finish with color enhancement is desired.

RECOMMENDED SURFACES
• Travertine
• Brazilian & Spanish Tile
• Unglazed Tile
• Marble
• Stone, Brick, & Clay Pavers
• Exposed Aggregates
• Quarry Tile

COVERAGE
For very porous surfaces: 1st coat: 150-200 sq. ft./gallon.
2nd coat 300-400 sq. ft./gallon.

For average density surfaces: 1st coat: 250-300+ sq.ft./gallon.
2nd coat 400+ sq. ft./gallon.
For very dense surfaces: 1.5x avg. density coverage Generally, the sealer will go twice as far on the 2nd coat as it did on the 1st coat.

Allow 24 hours between coats.

SURFACE PREPARATION

Always be sure surface is clean, dry, and free from any dirt, grease, oil, wax, or other contaminant. Read the entire label before using. Use only as directed. Always test on a small piece of material or a small inconspicuous area to determine suitability. Ensure the area is well ventilated. Ideal surface temperature should be between 60°F and 80°F. Product works best when it is the first substance applied to the surface, insuring proper penetration.

APPLICATION

Ultra Seal Enhancing Impregnating Natural Stone Sealer may be applied with spray applicator, brush, roller, or lint free rag. Spread evenly and uniformly- cover entire area, leaving no puddles. Avoid puddles by wiping up excess. Allow 24 hours between coats to ensure it has dried completely.
No buffing required.

SMOOTH SURFACES: apply Ultra Seal Enhancing Impregnating Natural Stone Sealer with a lint free cloth or short nap roller.

ROUGH SURFACES: apply with a 1⁄2 to 3⁄4 inch nap paint roller or paint brush.

VOC: 1.09 lb./gallon, 130.66 g/L

STORAGE AND HANDLING

CAUTION: Highly flammable & combustible liquid and vapor. Do not handle until all safety precautions have been read and
understood.

Handling: Do not get in eyes, on skin, or on clothing. Do not breathe vapors or mists. Keep container closed and tightly sealed when not in use. Keep away from sources of ignition – No
smoking. Take measures to prevent the buildup of electrostatic charge.

Conditions for safe storage: Keep in tightly closed, properly labeled containers. Keep in a cool, well-ventilated place.
Materials to avoid: Do not store with the following product types: Strong oxidizing agents, Explosives, Gases.

FIRST AID MEASURES

Eye Contact: Flush eyes with water. Seek medical attention if irritation persists.

Skin Contact: Remove contaminated clothing. Wash with soap and water. Seek medical attention if irritation persists.
Inhalation: If inhaled, remove to fresh air. If respiratory irritation, dizziness, nausea, or unconsciousness occurs, seek immediate medical assistance. In case of unconsciousness place patient stably in side position for transportation.

Ingestion: Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Rinse mouth with water. Seek medical attention if symptoms appear.

Melt Away Paint Stripper – Fast, Effective Coating Remover

Removes multiple layers in one application.
Effective on paver sealer, pint, acrylic sealers, epoxies & enamels
Strong emulsifier package lifts sealer in 15-20 minutes
Water soluble clean rinse technology
Sprayable VOC compliant
Methylene chloride and caustic free
Non Flammable
Dual action – lifts and emulsifies the coating
Bio-degradable and Environmentally Friendly
Ships DOT Non-Flammable, Non-Hazardous to all 50 states including California

Warrantied against material free of defects. Not warrantied against labor.

Application Instructions:

Pour contents into a pump-up sprayer system, cover and or dampen with water any grass, plants, or flowers they may encounter with overspray, then uniformly apply a flood coat of Melt Away Paint Stripper. Hold sprayer tip 12” from the surface while spraying and let dwell for 15-20 minutes (excessive layers may need longer dwell times or reapplication) until sealer and other coatings start to turn grayish or shows signs of peeling.

Using a plastic putty knife, you should be able to scrape the coating from the substrate. At this point it is ready to rinse utilizing a pressure washer with a turbo tip. The use of a fan tip as zero tip is not recommended as it will leave etch the substrate. Melt Away Paint Stripper and paver sealer remover can also be applied using a ½ nap roller as well.

Distributed by The Paver Sealer Store, LLC

ULTRA SEAL – Classic Gloss Wet Look Paver Sealer

ULTRA – Wet Look Paver Sealer is a two-component urethane which provides deep color enhancement and joint stabilization by locking the sand in-between the joints in place, forms a long-lasting protective barrier on the surface of the pavers or concrete, protecting them from the natural elements and the suns harmful UV rays. Not only is it user friendly, but it produces a consistent finish that wears evenly over time.

All of The Paver Sealer Store products are environmentally friendly, bio-degradable, will not harm vegetation, pet friendly, and are commercial quality – formulated with the contractor in mind. All products are VOC's compliant and can be used in all 50 states.

Click here for more before and after photos.

Seal RX Enhance

SEAL Rx ENHANCE

Seal RX Enhance Stone Sealer is a heavy duty, solvent based, silane-siloxane designed to enhance color, impart water repellency and stain resistance to a wide variety of natural stone, concrete and aggregate surfaces. The silanes react chemically and bond with the substrate to form an insoluble water-resistant treatment within 24-72 hours after application.

__________________________________________________________________________________________

RECOMMENDED USES:

For properly prepared, unsealed natural stone, concrete walls, foundations, pre-cast concrete, block, brick and most aggregate surfaces.

SURFACE PREPARATION:

Dirt, grease, grime and any foreign material must be removed before application of SEAL Rx ENHANCE. Treat surface for mildew. Oil and grease should be scrubbed with a solution of TSP and water.

APPLICATION INFORMATION:

Apply with brush, roller, airless sprayer or pump sprayer. When spraying, use a tip designed for gloss coatings. Apply when surface and air temperatures are above 32 Deg. F and rising. Do not apply if the threat of rain exists. Do not over apply or allow product to puddle.

Always apply a test sample to insure compatibility
Do not apply to a surface that was previously treated with another product
Take care to cover nearby vegetation, glass, plastic and metals. Seal RX 580 may damage them.
May be applied to damp surface, however, do not apply when standing water is present

SEAL Rx ENHANCE requires different application methods for smooth and porous/rough surfaces.

Smooth surfaces:

Apply with brush, roller or spray
Allow to sit for 30-45 minutes
Wipe off excess material with a t-shirt type material. The excess should be removed similar to removing wax from a car.

Porous/Rough surfaces: No wiping is necessary as long as product penetrated and no puddles or excess material is visible.

RECOMMENDED THINNER:

SEAL Rx ENHANCE does not require thinning and should be used as is, directly from the container.

BENEFITS:

Enhances color of substrate.
Reduces water absorption into the substrate, thus reducing spalling due to freeze thaw and efflorescence, thereby increasing the life of the substrate.
Resists staining
Colorless and non-yellowing protection preserves the appearance of the substrate.
Penetrating & breathable
Low VOC
May be applied to damp surfaces
UV Resistant
Reduces mildew growth on surface

TECHNICAL DATA:

Finish: Enhanced look

Pigment Type: None

Solvent Type: Solvent

Density: 8.50 lbs./Gal.

Viscosity @ 75 deg. F (24 deg. C): Waterlike

Coating VOC: <50 g/l

Clean Up: Clean up drips and spills immediately using any type of solvent. Clean tools and equipment with any type of solvent.

Coverage (Theoretical): Coverage will depend on porosity and contour of the surface being coated. Coverage typically averages 600-800 square feet per gallon.

Storage: After use, make sure to seal lid tightly. SEAL Rx ENHANCE will gel if left open.

Environmental & Safety Information:

Improper handling or use may be hazardous. Recommended safety precautions for storage, handling and application must be observed.

DANGER:

COMBUSTIBLE! KEEP OUT OF REACH OF CHILDREN!

Contains flammable solvents. Causes eye burns. Vapor is harmful. May cause allergic skin reaction. Do not get in eyes, on skin or on clothing. Wear eye and skin protective equipment when handling. Wear appropriate, properly fitted respirator (NIOSH.MSHA approved) during and after application unless air monitoring demonstrates vapor/mist levels are below applicable levels. Follow respirator manufacturer’s recommendations for use. Keep containers closed when not in use.

First Aid: In case of eye contact, flush eyes immediately with plenty of fresh water for at least 15 minutes. Call a physician. If inhaled, remove to fresh air. If not breathing, give artificial respiration, preferably mouth to mouth and seek immediate medical assistance. In case of skin contact, wash immediately with soap and fresh water. Remove contaminated clothing and launder before use. Discard shoes if material has penetrated inside surface.

Notice: Reports have associated repeated and prolonged occupational overexposure to solvent with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal.

WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear an NIOSH-approved respirator to control lead exposure. Carefully clean up with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.

Technical data contained herein is true and accurate at the date of issue, but is subject to change without notice. An Inseco representative should be contacted with any questions concerning product information or application procedures. Our products conform to Inseco quality standards, but no other warranty is expressed or implied. Liability, if any, is limited to the replacement of product or purchase price.

Paver Seal RX – 5 Gallon

Paver Seal Rx is a high-performance, water paver based paver sealer that provides protection, deep color enhancement, joint stabilization and durability for concrete pavers. The penetrating technology of the product seals up the pores in porous materials such as concrete to build a clear coating around it providing stain resistance. With Paver Seal Rx paver sealant protecting the pavers, they will shine longer and resist damage from foot traffic or vehicular traffic better than ever before! In addition to these benefits, Paver Seal Rx also protects against mildew growth and degradation from UV rays which may discolor otherwise beautiful surfaces. To know more about this incredible sealant with many properties call us at 813-308-9202 today!

Not only will you be left with beautifully preserved pavers, but ones that will withstand foot traffic and vehicular traffic on them better than ever before! Say goodbye to dirt covered surfaces and welcome fresher looking pavers. This environmentally safe compound helps preserve against mildew growth as well as deterioration from uv rays and includes 3 year warranty!

Available in one gallon containers as well!

RECOMMENDED USES:

For properly prepared concrete and brick pavers, slate, Saltillo tiles and clay roof tiles.

SURFACE PREPARATION:

Dirt, grease, grime and any foreign material must be removed before application of new coating. Treat surface
for mildew. Oil and grease should be scrubbed with a solution of TSP and water.

Contact a Paver Sealer Store representative at 619-658-5241 representative for detailed surface preparation specifications.

Do not apply to painted surfaces.

APPLICATION INFORMATION:

Mix product thoroughly and apply with brush, roller or airless sprayer. When spraying, use a tip designed for
gloss coatings. Apply when surface and air temperatures are above 50 Deg. F. Do not apply if the threat of rain
exists or if there is any puddling of water on the surface prior to Paver Seal RX curing. Cover and protect all
vegetation and surrounding areas not being sealed. Do not over apply, soak the substrate or allow product to
puddle. Two thin coats are recommended for best performance.

RECOMMENDED THINNER:

Paver Seal RX does not require thinning and should be used as is, directly from the container.

Paver Seal RX – 1 Gallon

Paver Seal Rx is a high-performance, water based sealer that provides protection, deep color enhancement, joint stabilization and durability for concrete pavers. The penetrating technology of the product seals up the pores in porous materials such as concrete to build a clear coating around it providing stain resistance. With Paver Seal Rx protecting the pavers, they will shine longer and resist damage from foot traffic or vehicular traffic better than ever before! In addition to these benefits, Paver Seal Rx also protects against mildew growth and degradation from UV rays which may discolor otherwise beautiful surfaces. To know more about this incredible sealant with many properties call us at 813-308-9202 today!

Smooth, wet surfaces are dominated by water molecules that attach themselves to the surface of the material with hydrophilic properties. Paver Seal Rx is a powerful sealer with hydrophobic properties which provides protective coating for porous materials like concrete pavers. With this deep penetrating technology, it does two important things: first seals up the pores in your paver's surface (providing protection) and second- coats them to provide long lasting color enhancement. Not only will you be left with beautifully preserved pavers, but ones that will withstand foot traffic and vehicular traffic on them better than ever before! Say goodbye to dirt covered surfaces and welcome fresher looking pavers. This environmentally safe compound helps preserve against mildew growth as well as deterioration from uv rays.

Available in 5 Gallon pails as well!

RECOMMENDED USES:
For properly prepared concrete and brick pavers, slate, Saltillo tiles and clay roof tiles.
SURFACE PREPARATION:
Dirt, grease, grime and any foreign material must be removed before application of new coating. Treat surface
for mildew. Oil and grease should be scrubbed with a solution of TSP and water. Contact a Paver Sealer Store representative at 813-308-9202
representative for detailed surface preparation specifications.
Do not apply to painted surfaces.
APPLICATION INFORMATION:
Mix product thoroughly and apply with brush, roller or airless sprayer. When spraying, use a tip designed for
gloss coatings. Apply when surface and air temperatures are above 50 Deg. F. Do not apply if the threat of rain
exists or if there is any puddling of water on the surface prior to Paver Seal RX curing. Cover and protect all
vegetation and surrounding areas not being sealed. Do not over apply, soak the substrate or allow product to
Two thin coats are recommended for best performance.
RECOMMENDED THINNER:
Paver Seal RX does not require thinning and should be used as is, directly from the container.