Sealer Information.

Join our newsletter to stay updated

TPSS-Logo-w-shadow-lg.png

Sealers – Home

Industry Best Sealers. Brick Paver Sealer. Epoxy. Concrete Sealer. Cleaners. Coatings. The Paver Sealer Store is the leading provider of industry

Read More

Trident

ABOUT TRIDENT Trident products are offered by SEK Corporation for professional use in the pressure wash industry. For over 30

Read More

Trident Cat 5

HURRICANE CAT 5 – FULL KIT Ultimate New Generation 2-Part Urethane Wet Look Sealer Hurricane CAT 5 is the ultimate

Read More
sealed-pavers.jpg

Home

Industry Best. Brick Paver Sealer. Epoxy. Concrete Sealer. Cleaners. Coatings. The Paver Sealer Store is the leading provider of industry best

Read More
melt away paint stripper pail with label (1)

Melt Away Paint Stripper – Fast, Effective Coating Remover

Paver Sealer Remover – Coatings Remover – Paint Stripper

The Paver Sealer Store’s Melt Away Paint Stripper is a highly effective, bio-degradable, environmentally friendly blend that’s been formulated to be non-hazardous and remove various types of coatings. This multi-purpose formula solution has been designed as a paver sealer remover, coating remover and paint stripper all in one. Within minutes, you will start to see the results.

The Paver Sealer Store’s Melt Away Paint Stripper is a great substitute for hazardous blends commonly used for stripping applications.

Read More
Ultra-seal-pail-with-label (1)

ULTRA SEAL – Classic Gloss Wet Look Paver Sealer

Ultra Seal Classic Gloss Water-based 2 Component Urethane Wet Look Paver Sealer. Enhances color & locks joint sand. Also has excellent abrasion & chemical resistance.

  • Can be applied almost immediately after cleaning (works with the water)
  • Provides a Protective Barrier
  • May be applied to damp surfaces
  • User, pet and environmentally friendly
  • Minimal odor
  • Will not harm vegetation
  • Inhibits weed growth and insect infestations
  • Exceptional sand joint stabilization
  • Eliminates the need for polymeric sand
  • VOC compliant in all 50 states
  • UV Protection
  • Two-Part Urethane
  • Classic “Wet Look” color enhancement
  • Hot tire mark resistant
  • 48% solids Formula
  • Mold and Algae Inhibitor

Theoretical coverage rate is 200-300 sqft per gallon dependent on the porosity of the substrate and the width of the sand joint. More porous surfaces will take more sealer. Adjust accordingly.

Application Instructions:

SURFACE PREPARATION: Pressure wash all surfaces to be sealed to remove all dirt and debris. Sealer can be applied to damp pavers.

STRIPPING: If previous sealer is hazed or peeling strip prior to sealing.

MIXING: 4 parts A to 1 part B
Add 1 gallon of part B to
4 gallons of part A. Mix continuously for 2 minutes using a paddle mixer.

FLOOD COAT: Dilute 1 gallon of concentrated sealer with 4 gallons of water. Wait 30 minutes or until the sealer has turned clear and is tacky before applying the finish coat.

FINISH COAT: Dilute 1 gallon of concentrated sealer with 1 gallon of water. Additional coats may be necessary to achieve the desired finish. This depends on the porosity of the paver and the width of the sand joint.

Ultra Seal Classic Gloss Wet Look Paver Sealer is produced and distributed by The Paver Sealer Store

 

Read More

Social Media Posts

This is a gallery to showcase images from your recent social posts

Join Our Newsletter