Paver Sealer Remover: Top 3 Methods
If you’re looking for paver sealer remover, you’ve come to the right place. In this article, we will discuss the top methods for removing paver sealer. Sealers are often applied to pavers in order to protect them from weathering and staining. However, over time, sealers can become faded or discolored. If this is the case with your pavers, it’s time to remove the old sealer and apply a new one. In this article, we will discuss three of the most popular methods for removing paver sealer: using a pressure washer, using a chemical paint stripper, and using a steam cleaner.
Read this article about Cleaning and Sealing Brick Pavers: How to Protect Your Investment
How to remove paver sealer with a pressure washer
Removing paver sealer with a pressure washer is a relatively easy process, but there are a few things to keep in mind.
First, always read the label on the paver sealer remover to see what type if it contains any harsh chemicals. You will want to avoid using any harsh chemicals on your pavers, as they can damage the surface.
Second, make sure you have an appropriate nozzle for your pressure washer. If the nozzle is too small, it could damage the pavers.
Third, start with a low pressure setting and work your way up to avoid damaging the pavers.
Fourth, hold the nozzle about six inches from the surface of the pavers and move it steadily across the surface.
Fifth, after you have removed the sealer, rinse the pavers with water to remove any residue.
How to remove paver sealer with a chemical stripper
There are a few ways to remove paver sealer with a chemical stripper. You can use:
- A gel stripper such as Goo Gone.
- An organic solvent such as lacquer thinner, acetone, or methylene chloride.
Each of these methods has its own set of instructions, but all involve saturating the sealer with the stripper and allowing it to work for a period of time before scrubbing it off with a brush or pressure washer. Be sure to protect your skin and eyes while working with any chemical stripper. Be careful not to strip the paint from wood or strip the finish from metal siding while working next to a house.
How to remove paver sealer with a steam cleaner
There are a few ways to remove sealer from pavers with a steam cleaner. You can try using a degreaser or citrus-based cleaner to help break down the sealant. Be sure to test the cleaner on an inconspicuous area of the paver first to make sure it doesn’t discolor or damage the surface.
Once you’ve chosen your cleaner, start by spraying it onto the paver and letting it sit for a few minutes. Then, use the steam cleaner to work the cleaner into the pores of the paver and allow it to soak in. Be sure to rinse off any leftover residue with clean water once you’re done.
Final Thoughts on Paver Sealer Remover
So, if you’re looking for a paver sealer remover, we highly recommend using NPS RX Paver Sealer Remover. It’s an easy-to-use product that will quickly remove old sealer from your pavers. Plus, it’s affordable and won’t damage your pavers in any way. If you’re ready to give it a try, be sure to check out our website for more information. Thanks for reading!
The Paver Sealer Store’s Bio-based QuickStripper is a highly effective, bio-degradable, environmentally friendly blend that’s been formulated to be non-hazardous and remove various types of coatings. This multi-purpose formula solution has been designed as a paver sealer remover, coating remover and paint stripper all in one. Within minutes, you will start to see the results.
The Paver Sealer Store’s Bio-based QuickStripper is a great substitute for hazardous blends commonly used for stripping applications.