Paver Sealer Remover: How to Remove Paver Sealer the Right Way
If you’re searching for a paver sealer remover, you’re likely dealing with faded, discolored, or failing paver sealer. Over time, exposure to UV rays, moisture, and wear can cause paver sealers to peel, whiten, or lose their appearance. When this happens, the best solution is to remove the old paver sealer before applying a new one.
In this guide, we’ll explain the best ways to remove paver sealer, including:
Removing paver sealer with a pressure washer
Using a chemical paver sealer stripper
Removing paver sealer with a steam cleaner
Read this article about Cleaning and Sealing Brick Pavers: How to Protect Your Investment
How to Remove Paver Sealer with a Pressure Washer
One of the most common methods for removing sealer from pavers is pressure washing. This method works best on light or deteriorating sealers, but may not fully remove thicker or multiple layers.
Tips for removing paver sealer with a pressure washer:
Start with low pressure and increase gradually
Use a fan-tip nozzle, not a zero-degree tip
Hold the nozzle 6–8 inches from the surface
Move evenly to avoid streaking or surface damage
Rinse thoroughly after removal
⚠️ Pressure washing alone may not completely remove intact or solvent-based sealers.
How to Remove Paver Sealer with a Chemical Stripper
For most projects, the best paver sealer remover is a chemical paver sealer stripper. Chemical stripping is the most effective method for removing acrylic sealers, solvent-based sealers, and multiple layers of buildup.
Common paver sealer stripper options:
Commercial paver sealer removers such as Bio-Based QuikStripper
Gel strippers (limited effectiveness on masonry)
- Strong solvents (professional use only)
How to remove paver sealer using a chemical stripper:
Apply the paver sealer stripper evenly
Allow proper dwell time so the sealer breaks down
Agitate with a stiff brush or broom
Rinse with water or pressure washing
✅ Bio-based paver sealer removers offer powerful stripping performance with lower odor and easier cleanup.
How to Remove Paver Sealer with a Steam Cleaner
A steam cleaner can help remove thin layers of paver sealer, especially when paired with a degreaser or citrus-based cleaner.
Steam cleaning steps:
Apply a mild cleaner (test first)
Allow it to dwell for several minutes
Use steam to work into the paver pores
Rinse thoroughly with clean water
⚠️ Steam cleaning is best for light-duty sealer removal and is not ideal for heavy or intact sealers.
Best Method for Removing Paver Sealer
While pressure washing and steam cleaning can help in some situations, chemical stripping is the most reliable way to remove paver sealer—especially for failed, peeling, or multiple layers.
Using a purpose-built paver sealer remover ensures:
More complete sealer removal
Proper surface preparation
Better adhesion for new sealer
Final Thoughts on Paver Sealer Removers
Choosing the right paver sealer remover is essential for restoring your pavers and achieving long-lasting results. For consistent performance, a bio-based chemical paver sealer stripper is often the most effective solution for removing old sealer without damaging the surface.
Strip it right. Seal it right. Trust The Paver Sealer Store.
Bio-Based Quick Stripper – Paver Sealer remover, Paint Stripper, Coatings Remover
The Paver Sealer Store’s Bio-based QuickStripper is a highly effective, bio-degradable, environmentally friendly blend that’s been formulated to be non-hazardous and remove various types of coatings. This multi-purpose formula solution has been designed as a paver sealer remover, coating remover and paint stripper all in one. Within minutes, you will start to see the results.
The Paver Sealer Store’s Bio-based QuickStripper is a great substitute for hazardous blends commonly used for stripping applications.
